General Motorcycle News
When I was growing up in the 70’s, every kid wanted a Trail 70. Now, they are quite collectible and thus restorable- so a friend is restoring his candy ruby red 72. It started in pretty rough but complete condition and is moving along nicely. I took a break from Read more…
Well, the shocks arrived and are installed… these RFY shocks are Chinese look-a-likes of classic Ohlins or Penske shocks. Obviously not the same quality as Ohlins but not bad. This guy has taken them apart and looked them over and they really are pretty good for the money- about 100.00/set Read more…
So, today we installed the new Dunlop 404 tires and we are working on the final fitting of the tail section. As soon as the new rear shocks get here, we will have a rolling frame and be ready to install the engine! The taillight is out of some 70’s Read more…
Before we can put the engine back in the bike, we need to have a rolling frame and before we can do that, we need the wheels in their final configuration… These Comstar wheels are a bit difficult to work with since they are an aluminum/steel hybrid- the rim and Read more…
The stock peg brackets are huge and heavy but I am committed to using as much of the original bike as I can, so we are trimming and drilling to lighten them and remove the rear mounts. While I had the die grinder out, I trimmed the front fender to Read more…
With the engine ready to install, I got to work on the frame and misc parts we need to get ready. The frame was media blasted, epoxy primed and painted in orange basecoat/clearcoat for durability and show quality looks. Frames are a lot of work since they have lots of Read more…
Well, the motor is reassembled, painted (looks great in satin black) and almost back together. Several boxes arrived with Christmas presents for the project- a new tail section and lots of stainless steel cap screws! The frame needs some mods to accept the new tail and then we need to Read more…
While the frame sits forlorn in the middle of the floor, I’ve been working on some of the smaller parts- bead blasting and painting. Also, I’m working on the gauges. I like the worn, faded look of the faces but the cases will get repainted and I’ll put all new Read more…
Today we are installing the valves, springs and keepers back in the head. Step one is to make sure you lay out all the parts so you don’t have to do stuff over like I did! I installed 2 of the valves and springs before I realized I hadn’t put Read more…
Well, lots going on in today’s post- We are lapping in the valves and reassembling the head. As it turned out, 2 of the exhaust valve seats were oval from the valve guides being so worn. I found this out after getting the valves refaced to eliminate the pitting and Read more…
After driving out the old guides, I needed to install the new bronze guides. First, I measured them to make sure they were within .001 in. The procedure is pretty simple- Put the head in the oven at 300deg F and put the guides in the freezer. After the head Read more…
Since I could never get the bike to run well even after all the normal tuning and carb cleaning, I decided to pull the motor apart and take a look. It had a very “rattly” sound to it which bothered me. Nothing looked wrong except the valves had a lot Read more…
Its coming up quickly- October 10-12 and I suspect it will be even bigger and better than last year. Every year it gets bigger and I don’t really see how they can get more people in there on Saturday or Sunday but it will be awesome. From the earliest Harleys, Read more…
Well, after installing and playing around with the rebuilt carbs for a couple of weeks, it became clear that something else was wrong so I checked the valve timing and it may well be off, but its hard to tell since the timing marks are on the ignition advance unit Read more…
I stopped over at one of my customer’s garage to pick something up and had to take a couple shots of the bikes I had painted for him. It is a very nice and rare collection- Yamaha RZ500 with the Japanese aluminum frame, A 75 Can-Am 250 that was converted Read more…
I’ve been working a bit on the CB750 and here is where it stands- the gas tank had a fair amount of rust inside and some small rust-through pinholes so I used the old distilled vinegar trick to clean it out before using POR15 sealer on it. Vinegar is a Read more…
Well, the Ninja is back together and looking awesome! The owner still has some small things to finish before it is ready to ride but as you can see, it is almost ready. The bike had a Kerker pipe on it but the stock pipes are in just about perfect Read more…
Well, I’ve been busy and not posting updates but here are some progress pictures. After getting all the repairs and bodywork done, everything was primed with epoxy primer and then the Firecracker Red base coat was sprayed. After drying for a day, I used the new decals to layout the Read more…
One of my customers recently bought an 85 900 Ninja with only 7000 miles on it. Mechanically, it is in good shape but cosmetically, it is rough. It was repainted at some point in the past and done very poorly so we are starting from scratch and painting it in Read more…
My friend Rob at Tapeworks has been working on this project for several months now and it is in the final stages before production. Make sure you head over to the Kickstarter page and get in on the action. He needs to raise funds to have all the molds made Read more…
Well, I’ve been seriously lazy about updating the website but here is the latest project- a 1985 BMW K100 with some later bodywork pieces. The owner wanted metallic orange similar to what Lamborghini uses and it really looks great. Digital cameras struggle with colors this rich but the front shot Read more…
Well, I haven’t been totally unproductive for the past month but I haven’t exactly been setting the shop on fire with activity either. However, now that it is warming up, I’ll be spending more time working on the bike so it should progress more quickly… As “old bike people” know, Read more…
Well, I think I’ve decided to go in the direction of the Street Tracker that Airtech has on their site. The tail plastic on this bike is cracked and pretty beat up and the Street Tracker tail looks great so we will probably use it. But, I’m going to stick Read more…
One of the first things that needs to be done on this bike is a brake upgrade. Actually, I need brakes of some sort just to move it around since it is so heavy. The problem is that the original brakes are in pretty bad condition- rusted calipers, frozen master Read more…
Well, there is a new bike in the shop and I’m still undecided about what direction to go with it. It is a complete stock 750 right down to the turn signals- although the muffler has been changed. The stock seat is in excellent condition and the bike only has Read more…
So, a friend of mine owns a Harley dealership and sent me a few pictures of the the new Harley line of smaller bikes that was introduced yesterday in KC. For a lot of people who own Harleys, customization is one of the main draws. We all like to make Read more…
Well, this years vintage festival was another great success and the weather was perfect. As usual, lots and lots of restored and original vintage bikes and some great racing too! Here are a few pictures from the weekend.
Don’t forget to plan on attending the 9th annual Vintage Festival October 11th-13th. You can get all the details and buy tickets over on the Barber website. I’ve been going every year since it started and it is always an awesome weekend with thousands of vintage bikes, racing and the Read more…
I’ve added some pages under the “Galleries” tab that chronicle the RZ350 restoration process from start to finish. Feel free to link to the pages, but please don’t just link the photos since it totally misses the whole project and the point of posting them. Enjoy…
Well, the big day came and I moved her from the shop to the garage- and then rode all afternoon! It runs great and it really a blast to ride. Here are a few pictures of the finished product but I am working on a page under the “Galleries” tab Read more…
Well, after fixing a small leak around the petcock, she started on the 3rd kick. Pretty sweet. Runs great and sounds awesome… I’ll finish the buffing tomorrow and get it all assembled for it’s first road test.
We are moving along with the paint and after the pearl white, I painted the red. After the base red, I mixed a pearl top coat to give it the sparkle of the original color. On the factory bike, the red was painted on some panels like the tank and Read more…
The bodywork is moving along and the epoxy primer, polar white base and diamond pearl is on the parts. The tank was in decent shape but had some dents, dings and lots of scratches that needed to be filled and of course, all the old decals had to come off. Read more…
The mechanical stuff is about as far along as it can go without getting the bodywork done since I will need the gas tank (with gas!) pretty soon. The brakes are on and bled. All of the bodywork is done to the point of paint. The white epoxy primer is Read more…
Well, progress continues and after fighting the old DG pipes which really didn’t fit well, I’ve got them installed and not contacting the frame anywhere. The radiator is back on- had to get the pipes on before the radiator… The brakes are ready to be hooked up and bled and Read more…
Today I’m hooking all the electrical back up and also doing a bit of bodywork. I’ll post that later, but here are a couple of pictures of the frame with the motor installed. Such a cool old bike…
The motor is back in the frame… it ran fantastic and was well set up when I got the bike. It only had a couple of thousand miles since it had been rebuilt although that was a few years ago. But after looking in the exhaust ports and seeing how Read more…
The front end is back on and progress is being made on the hundreds of small items that will need to be refinished if the bike is going to have a “restored” look versus just a “repainted” look. While I’m not replacing every nut and bolt, I am cleaning and Read more…
Both wheels are now painted and clear coated. The brake rotors are bead blasted and I think I’ll leave them like that instead of painting the centers gold or black. The rear shock is actually in very good condition and cleaned up nicely. I did paint the spring by hand Read more…
The frame and swingarm are done- clearcoat on the frame and a medium sparkle silver on the swingarm. I will say, you better be on your game when you are clearing a frame as complicated as this with lots of tubes, tabs, cross members, and 360 degrees of coverage needed. Read more…
The frame has been epoxy primed and base coated. A few people have asked why I just didn’t get the frame powder coated. Several reasons- 1st, they can’t match it to the paint I am going to use on the panels and I want it to match. 2nd, The bike Read more…
The previous owner had welded some lugs to the frame by the steering head to mount a modern style Yamaha R1 steering dampener. Not a nice clean job and they were rusting, etc. The bike really doesn’t need a steering dampener and I want it basically stock looking, so I Read more…
Not much to see- except a bare frame. The motor is pulled and sitting in the parts washer. The swingarm is apart and the nice thing is that all of the linkages and pivot bearings are nice and tight. So it is mostly a matter of cleaning and painting. I Read more…
Well, the bike is almost all in pieces. The wiring harness is a mess since the bike was raced and some of the wires were cut. I’m sourcing some original stuff and will have to make some. After the engine is out, the frame will be painted back in the Read more…
These are some forged aluminum Marchesini that are going on a customers GSXR1000. The stock black was too plain for him and he liked the gold we painted the wheels on his Ducati 916, so that’s the color we went with. You don’t realize how dull powdercoating looks until you Read more…
So, the front end is apart and we are making good progress. Front wheel is painted gold… the rotors are cleaned up and centers painted, forks are painted, all the handlebar switch gear is painted, master cylinder is painted, upper clamp is painted and the upper stay will be bead Read more…
Well, I’ve always wanted one of these so when a friend (the guy who owns the RZ500 and the Hejira) told me he knew someone selling one I pounced on it. This bike is a Canadian model that has a race history so the engine has lots of upgrades. It Read more…
Here are the finished tank and rear fender. We cut off about 3 inches and relocated where the new taillight will mount. Great colors- antique gold and dark teal. The gas cap was is terrible condition so I stripped all the corroded chrome off of it and painted it in Read more…
After getting all the bodywork finished, the next step is to put the base coats on. In this case, we are using an antique gold and dark teal. We put the gold on first so that it can be masked off easily to put the teal on. Taping off the Read more…
This was a fun small job that I did for the guy who bought my Triumph Street Triple R (which I now regret selling!). He is doing a cafe style semi-restoration on the 360 and so we needed to paint the bodywork. We picked a good classic/retro color scheme of Read more…